The QColor class provides colors based on RGB. More...
#include <qcolor.h>
A color is normally specified in terms of RGB (red,green and blue) components, but it is also possible to specify HSV (hue,saturation and value) or set a color name (the names are copied from from the X11 color database).
In addition to the RGB value, a QColor also has a pixel value. This value is used by the underlying window system to refer to a color. It can be thought of as an index into the display hardware's color table.
There are 19 predefined global QColor objects:
black, white, darkGray, gray, lightGray, red, green, blue, cyan, magenta, yellow, darkRed, darkGreen, darkBlue, darkCyan, darkMagenta, darkYellow, color0 and
color1.
The colors color0 (zero pixel value) and color1 (non-zero pixel value)
are special colors for drawing in bitmaps.
The QColor class has an efficient, dynamic color allocation strategy. A color is normally allocated the first time it is used (lazy allocation), that is, whenever the pixel() function is called:
Since many people don't know the HSV color model very well, we'll cover it briefly here.
The RGB model is hardware-oriented. Its representation is close to what most monitors show. In contrast, HSV represents color in a way more suited to traditional human perception of color. For example, the relationships "stronger than", "darker than", "the opposite of" are easily expressed in HSV, but are much harder to express in RGB.
HSV, like RGB, has three components. They are:
Here are some examples: Pure red is H=0, S=255, V=255. A dark red, moving slightly towards the magenta, could be H=350 (equvalent to -10), S=255, V=180. A grayish light red could have H about 0 (say 350-359 or 0-10), S about 50-100, and S=255.
See also: QPalette, QColorGroup and QApplication::setColorSpec().
Examples: grapher/grapher.cpp forever/forever.cpp desktop/desktop.cpp connect/connect.cpp drawdemo/drawdemo.cpp hello/hello.cpp picture/picture.cpp xform/xform.cpp progress/progress.cpp widgets/widgets.cpp
Constructs an invalid color with the RGB value (0,0,0). An invalid color is a color that is not properly set up for the underlying window system.
See also: isValid().
Constructs a color with a RGB value and a custom pixel value.
If the pixel = 0xffffffff, then the color uses the RGB value in a standard way. If pixel is something else, then the pixel value will be set directly to pixel (skips the normal allocation procedure).
Constructs a color that is a copy of c.
Constructs a named color, i.e. loads the color from the color database.
See also: setNamedColor().
Constructs a color with the RGB value (r,g,b). r, g and b must be in the range 0..255.
See also: setRgb().
Constructs a color with the RGB or HSV value (x,y,z).
The (x,y,z) triplet defines an RGB value if colorSpec == QColor::Rgb. x (red), y (green) and z (blue) must be in the
range 0..255.
The (x,y,z) triplet defines a HSV value if colorSpec == QColor::Hsv. x (hue) must be in the range -1..360 (-1 means
achromatic), and y (saturation) and z (value) must be in the range
0..255.
See also: setRgb() and setHsv().
Allocates the RGB color and returns the pixel value.
Allocating a color means to obtain a pixel value from the RGB specification. The pixel value is an index into the global color table.
Calling the pixel() function will allocate automatically if the color was not already allocated.
See also: setLazyAlloc() and enterAllocContext().
Returns the blue component of the RGB value.
[static]Internal clean up required for QColor. This function is called from the QApplication destructor.
See also: initialize().
[static]Returns the current color allocation context.
The default context is 0.
See also: enterAllocContext() and leaveAllocContext().
Returns a darker (or lighter) color.
Returns a darker color if factor is greater than 100. Setting factor to 300 returns a color that has one third the brightness.
Returns a lighter color if factor is less than 100, equal to light(10000 / factor).
This function converts the current RGB color to HSV, divides V by factor and converts back to RGB.
See also: light().
Examples: desktop/desktop.cpp xform/xform.cpp
[static]Destroys a color allocation context, context.
This function deallocates all colors that were allocated in the specified context. If context == -1, it frees up all colors that the application has allocated. If context == -2, it frees up all colors that the application has allocated, except those in the default context.
The function does nothing for true color displays.
See also: enterAllocContext() and alloc().
Examples: showimg/showimg.cpp
[static]Enters a color allocation context and returns a nonzero unique identifier.
Color allocation contexts are useful for programs that need to allocate many colors and throw them away later, like image viewers. The allocation context functions work for true color displays as well as colormap display, except that QColor::destroyAllocContext() does nothing for true color.
Example:
QPixmap loadPixmap( const char *fileName )
{
static int alloc_context = 0;
if ( alloc_context )
QColor::destroyAllocContext( alloc_context );
alloc_context = QColor::enterAllocContext();
QPixmap pm( fileName );
QColor::leaveAllocContext();
return pm;
}
The example code loads a pixmap from file. It frees up all colors that were allocated the last time loadPixmap() was called.
The initial/default context is 0. Qt keeps a list of colors associated with their allocation contexts. You can call destroyAllocContext() to get rid of all colors that were allocated in a specific context.
Calling enterAllocContext() enters an allocation context. The allocation context lasts until you call leaveAllocContext(). QColor has an internal stack of allocation contexts. Each call to enterAllocContex() must have a corresponding leaveAllocContext().
// context 0 active
int c1 = QColor::enterAllocContext(); // enter context c1
// context c1 active
int c2 = QColor::enterAllocContext(); // enter context c2
// context c2 active
QColor::leaveAllocContext(); // leave context c2
// context c1 active
QColor::leaveAllocContext(); // leave context c1
// context 0 active
// Now, free all colors that were allocated in context c2
QColor::destroyAllocContext( c2 );
You may also want to set the application's color specification. See QApplication::setColorSpec() for more information.
See also: leaveAllocContext(), currentAllocContext(), destroyAllocContext() and QApplication::setColorSpec().
Returns the green component of the RGB value.
Returns the current RGB value as HSV.
Arguments:
[static]Internal initialization required for QColor. This function is called from the QApplication constructor.
See also: cleanup().
Returns TRUE if the color is dirty, i.e. lazy allocation is enabled and an RGB/HSV value has been set but not allocated.
See also: setLazyAlloc(), alloc() and pixel().
Returns TRUE if the color is invalid, i.e. it was constructed using the default constructor.
[static]Returns TRUE if lazy color allocation is enabled (on-demand allocation), or FALSE if it is disabled (immediate allocation).
See also: setLazyAlloc().
[static]Leaves a color allocation context.
See enterAllocContext() for a detailed explanation.
See also: enterAllocContext() and currentAllocContext().
Examples: showimg/showimg.cpp
Returns a lighter (or darker) color.
Returns a lighter color if factor is greater than 100. Setting factor to 150 returns a color that is 50% brighter.
Returns a darker color if factor is less than 100, equal to dark(10000 / factor).
This function converts the current RGB color to HSV, multiplies V with factor and converts back to RGB.
See also: dark().
Examples: desktop/desktop.cpp xform/xform.cpp
[static]Returns the maximum number of colors supported by the underlying window system.
[static]Returns the number of color bit planes for the underlying window system.
The returned values is equal to the default pixmap depth;
See also: QPixmap::defaultDepth().
Returns TRUE if this color has different RGB value from c, or FALSE if they have equal RGB values.
Assigns a copy of the color and returns a reference to this color.
Returns TRUE if this color has the same RGB value as c, or FALSE if they have different RGB values.
Returns the pixel value.
This value is used by the underlying window system to refer to a color. It can be thought of as an index into the display hardware's color table.
See also: setLazyAlloc() and alloc().
Returns the red component of the RGB value.
Returns the RGB value.
Bits 0-7 = red, bits 8-15 = green, bits 16-23 = blue.
The return type QRgb is equivalent to unsigned int.
Returns the red, green and blue components of the RGB value in *r, *g and *b. The value range for a component is 0..255.
Sets a HSV color value.
Arguments:
Examples: grapher/grapher.cpp drawdemo/drawdemo.cpp progress/progress.cpp
[static]Enables or disables lazy color allocation.
If lazy allocation is enabled, colors are allocated the first time they are used (upon calling the pixel() function). If lazy allocation is disabled, colors are allocated when they are constructed or when either setRgb() or setHsv() is called.
Lazy color allocation is enabled by default.
See also: lazyAlloc(), pixel() and alloc().
Sets the RGB value to that of the named color.
The "#RRGGBB" color format is supported on all platforms, where RR, GG, and BB and hex digits.
A color name may also be a color in the X color database (rgb.txt) , e.g. "steelblue" or "gainsboro". The X color names also work under Qt for Windows.
Sets the RGB value to rgb.
Bits 0-7 = red, bits 8-15 = green, bits 16-23 = blue.
Warning: The bit encoding may change in a future version of Qt. Please use the qRgb() function to compose RGB triplets.
The type QRgb is equivalent to unsigned int.
Sets the RGB value to (r,g,b). r, g and b must be in the range 0..255.
Examples: widgets/widgets.cpp
Writes a color object to the stream.
Serialization format: RGB value serialized as an UINT32.
Reads a color object from the stream.
Returns the red component of the RGB triplet rgb.
See also: qRgb() and QColor::red().
Examples: qmag/qmag.cpp
Returns the green component of the RGB triplet rgb.
See also: qRgb() and QColor::green().
Examples: qmag/qmag.cpp
Returns the blue component of the RGB triplet rgb.
See also: qRgb() and QColor::blue().
Examples: qmag/qmag.cpp
Returns the RGB triplet (r,g,b).
Bits 0-7 = r (red), bits 8-15 = g (green), bits 16-23 = b (blue).
Warning: The bit encoding may change in a future version of Qt.
The return type QRgb is equivalent to unsigned int.
See also: qRed(), qGreen() and qBlue().
Examples: desktop/desktop.cpp
Returns a gray value 0..255 from the (r,g,b) triplet.
The gray value is calculated using the formula:
(r*11 + g*16 + b*5)/32
This is an overloaded member function, provided for convenience. It differs from the above function only in what argument(s) it accepts.
Search the documentation, FAQ, qt-interest archive and more (uses
www.troll.no):
This file is part of the Qt toolkit, copyright © 1995-98 Troll Tech, all rights reserved.
It was generated from the following files:
| Copyright © 1998 Troll Tech | Trademarks | Qt version 1.42
|