The QDict class is a template class that provides a dictionary based on char* keys.
More...
#include <qdict.h>
Inherits QGDict.
char* keys.
QDict is implemented as both a template and a macro class. Define a template instance QDict<X> to create a dictionary that operates on pointers to X, or X*.
A dictionary is a collection that associates an item with a key.
The key is used for inserting and looking up an item. QDict has
char* keys.
The dictionary has very fast insertion and lookup.
Example:
#include <qdict.h>
#include <stdio.h>
void main()
{
// Creates a dictionary that maps char* ==> char* (case insensitive)
QDict<char> dict( 17, FALSE );
dict.insert( "France", "Paris" );
dict.insert( "Russia", "Moscow" );
dict.insert( "Norway", "Oslo" );
printf( "%s\n", dict["Norway"] );
printf( "%s\n", dict["FRANCE"] );
printf( "%s\n", dict["russia"] );
if ( !dict["Italy"] )
printf( "Italy not defined\n" );
}
Program output:
Oslo
Paris
Moscow
Italy not defined
The dictionary in our example maps char* keys to char* items.
Note that the mapping is case insensitive (set in the
constructor). QDict implements the [] operator to lookup an item.
A QDict can also be instantiated through a macro expansion, but this is necessary only for compilers that do not support templates. See the collection classes documentation for a general discussion on template-based versus macro-based collections.
QDict is implemented by QGDict as a hash array with a fixed number of entries. Each array entry points to a singly linked list of buckets, in which the dictionary items are stored.
When an item is inserted with a key, the key is converted (hashed) to an integer index into the hash array. The item is inserted before the first bucket in the list of buckets.
Looking up an item is normally very fast. The key is again hashed to an array index. Then QDict scans the list of buckets and returns the item found or null if the item was not found. You cannot insert null pointers into a dictionary.
The size of the hash array is very important. In order to get good performance, you should use a suitably large prime number. Suitable means equal to or larger than the maximum expected number of dictionary items.
Items with equal keys are allowed. When inserting two items with the same key, only the last inserted item will be visible (last in, first out) until it is removed.
Example:
#include <qdict.h>
#include <stdio.h>
void main()
{
// Creates a dictionary that maps char* ==> char* (case sensitive)
QDict<char> dict;
dict.insert( "Germany", "Berlin" );
dict.insert( "Germany", "Bonn" );
printf( "%s\n", dict["Germany"] );
dict.remove( "Germany" ); // Oct 3rd 1990
printf( "%s\n", dict["Germany"] );
}
Program output:
Bonn
Berlin
The QDictIterator class can traverse the dictionary contents, but only in an arbitrary order. Multiple iterators may independently traverse the same dictionary.
Calling setAutoDelete(TRUE) for a dictionary tells it to delete items that are removed . The default is to not delete items when they are removed.
When inserting an item into a dictionary, only the pointer is copied, not the item itself. This is called a shallow copy. It is possible to make the dictionary copy all of the item's data (known as a deep copy) when an item is inserted. insert() calls the virtual function QCollection::newItem() for the item to be inserted. Inherit a dictionary and reimplement it if you want deep copies.
When removing a dictionary item, the virtual function QCollection::deleteItem() is called. QDict's default implementation is to delete the item if auto-deletion is enabled.
See also: QDictIterator, QIntDict and Collection Classes
Constructs a copy of dict.
Each item in dict are inserted into this dictionary. Only the pointers are copied (shallow copy).
Constructs a dictionary with the following properties:
Arguments:
Setting caseSensitive to TRUE will treat "abc" and "Abc" as different keys. Setting it to FALSE will make the dictionary ignore case. Case insensitive comparision includes only the 26 standard letters A..Z, not French or German accents or Scandinavian letters.
Setting copyKeys to TRUE will make the dictionary copy the key when an item is inserted. Setting it to FALSE will make the dictionary only use the pointer to the key.
Removes all items from the dictionary and destroys it.
All iterators that access this dictionary will be reset.
See also: setAutoDelete().
[virtual]Removes all items from the dictionary.
The removed items are deleted if auto-deletion is enabled.
All dictionary iterators that operate on dictionary are reset.
See also: remove(), take() and setAutoDelete().
Reimplemented from QCollection.
[virtual]Returns the number of items in the dictionary.
See also: isEmpty().
Reimplemented from QCollection.
Returns the item associated with key, or null if the key does not exist in the dictionary.
This function uses an internal hashing algorithm to optimize lookup.
If there are two or more items with equal keys, then the last inserted of these will be found.
Equivalent to the [] operator.
See also: operator[].
Inserts the key with the item into the dictionary.
The key does not have to be a unique dictionary key. If multiple items are inserted with the same key, only the last item will be visible.
Null items are not allowed.
See also: replace().
Returns TRUE if the dictionary is empty, i.e. count() == 0. Returns FALSE otherwise.
See also: count().
Assigns dict to this dictionary and returns a reference to this dictionary.
This dictionary is first cleared, then each item in dict is inserted into this dictionary. Only the pointers are copied (shallow copy), unless newItem() has been reimplemented().
Returns the item associated with key, or null if the key does not exist in the dictionary.
This function uses an internal hashing algorithm to optimize lookup.
If there are two or more items with equal keys, then the last inserted of these will be found.
Equivalent to the find() function.
See also: find().
Removes the item associated with key from the dictionary. Returns TRUE if successful, or FALSE if the key does not exist in the dictionary.
If there are two or more items with equal keys, then the last inserted of these will be removed.
The removed item is deleted if auto-deletion is enabled.
All dictionary iterators that refer to the removed item will be set to point to the next item in the dictionary traversing order.
See also: take(), clear() and setAutoDelete().
Replaces an item which has a key equal to key with item.
If the item does not already exist, it will be inserted.
Null items are not allowed.
Equivalent to:
QDict<char> dict;
...
if ( dict.find(key) )
dict.remove( key );
dict.insert( key, item );
If there are two or more items with equal keys, then the last inserted of these will be replaced.
See also: insert().
Changes the size of the hashtable the newsize. The contents of the dictionary are preserved, but all iterators on the dictionary become invalid.
Returns the size of the internal hash array (as specified in the constructor).
See also: count().
Debugging-only function that prints out the dictionary distribution using debug().
Takes the item associated with key out of the dictionary without deleting it (even if auto-deletion is enabled).
If there are two or more items with equal keys, then the last inserted of these will be taken.
Returns a pointer to the item taken out, or null if the key does not exist in the dictionary.
All dictionary iterators that refer to the taken item will be set to point to the next item in the dictionary traversal order.
See also: remove(), clear() and setAutoDelete().
Search the documentation, FAQ, qt-interest archive and more (uses
www.troll.no):
This file is part of the Qt toolkit, copyright © 1995-98 Troll Tech, all rights reserved.
It was generated from the following files:
| Copyright © 1998 Troll Tech | Trademarks | Qt version 1.42
|