Expected Outputs for SBS Boot and Startup
***> re
***> gm
***** VME-Ultra *****
Version: 1.5(12) for the E7
Copyright (C) 1991 by ELTEC Elektronik GmbH, Mainz
ultra> bo
Network bootstrap V1.1
Host ethernet address = aa:00:04:00:13:f4
loading 140.181.96.157:/lynx/boot.e7 ...
Received non-ip packet. Type=0x0806
:
:
Received non-ip packet. Type=0x8137
udp: unknown protocol 6
udp: unknown protocol 6
received IP packet for 0x0]NLm00u
udp: unknown protocol 6
bootfile has been read successfully !
LynxOS/68040-EUROCOM 7 Version 2.1.1
Serial number: SYSFDSSYS_E70020
Copyright 1993 Lynx Real-Time Systems Inc.
Copyright 1992, 1993 Sysgo RTS
All rights reserved.
LynxOS (E7) created Fri Jul 1 11:41:48 1994
start boot procedure
extract hostname and internet address from database
my_ip: 140.181.98.63
set hostname now to : E7ELXA
configure host network parameters
localhost: bad value
lo: flags=8<LOOPBACK>
oblan: flags=63<P,BROADCAST,NOTRAILERS,RUNNING>
inet 140.181.98.63 netmask ffff0000 broadcast 140.181.255.255
start NFS client
mounting dsag:/disks/dsag/lynx on /nfs readonly
start group specific part of boot procedure
l_check: 1
groupname,machine,type: aladin e7elxa E7
c_command: /nfs/groups/daq/usr/kurz/bootutil/aladin aladin E7
#######
###### # # ###### # # # ##
# # # # # # # #
##### # ##### # ## # #
# # # # ## ######
# # # # # # # #
###### # ###### ###### # # # #
## # ## ##### # # #
# # # # # # # # ## #
# # # # # # # # # # #
###### # ###### # # # # # #
# # # # # # # # # ##
# # ###### # # ##### # # #
booting host: E7ELXA for group: aladin
rename /owngroup to /aladin
mounting dsag:/disks/dsag/lynx/groups/aladin on /aladin r/w
mounting dsag:/disks/dsag/lynx/sbs on /sbs readonly
saving boot /etc directory on /etc.boot
linking /etc directory to /aladin/etc
linking /tmp directory to /aladin/tmp
copy mtab and nodetab datasets on /etc directory
start adjtime daemon to set regularly time retrieved from DSAG server
33
Mon Apr 17 10:29:45 GMT 1995
Mon Apr 17 12:29:46 MET DST 1995
set quantum = 10 ms
setquantum(DEFAULT_QUANTUM, 10 ms, 17)
created and initalized daq status segment
creating message queue file
Creating new message file /dev/msg
Creating new command file /dev/com
end of group specific boot procedure
start internet daemon
remove directories and files not needed anymore
boot procedure finished
pROBE+>go 20
*************** WARNING ********************
Netboot data in battery-backed-up RAM corrupted!
Using default values
********************************************
CVC030 LynxOS Bootstrap, Version 1.1
Copyright Sysgo Real-Time Solutions GmbH 1993
All rights reserved
Current boot device is: network
Current root device is 0x0 0x16 read/write
Will autoboot after 000 seconds. To abort hit any key
My IP address = 140.181.102.24
Server's IP address = 140.181.96.157
Host ethernet address = aa:00:04:00:13:f4
loading 140.181.96.157:/lynx/boot.cvc ...done.
LynxOS/68030-CVC Version 2.1.0
Serial number: SYSFDSSYSCM301-5
Copyright 1993 Lynx RTS
Copyright 1993 Sysgo RTS
All rights reserved.
LynxOS (CVC030) created Fri Jun 10 08:11:41 1994
start boot procedure
extract hostname and internet address from database
my_ip: 140.181.102.24
set hostname now to : CVC12
configure host network parameters
localhost: bad value
lo: flags=8<LOOPBACK>
leblan: flags=63<UP,BROADCAST,NOTRAILERS,RUNNING>
inet 140.181.102.24 netmask ffff0000 broadcast 140.181.255.255
start NFS client
mounting dsag:/disks/dsag/lynx on /nfs readonly
start group specific part of boot procedure
l_check: 1
groupname,machine,type: aladin cvc12 CVC
c_command: /nfs/groups/daq/usr/kurz/bootutil/aladin aladin CVC
# #####
#### # # #### ## # #
# # # # # # # # #
# # # # # #####
# # # # # #
# # # # # # # #
#### ## #### ##### #######
## # ## ##### # # #
# # # # # # # # ## #
# # # # # # # # # # #
###### # ###### # # # # # #
# # # # # # # # # ##
# # ###### # # ##### # # #
booting host: CVC12 for group: aladin
rename /owngroup to /aladin
mounting dsag:/disks/dsag/lynx/groups/aladin on /aladin r/w
mounting dsag:/disks/dsag/lynx/sbs on /sbs readonly
saving boot /etc directory on /etc.boot
linking /etc directory to /aladin/etc
linking /tmp directory to /aladin/tmp
copy mtab and nodetab datasets on /etc directory
start adjtime daemon to set regularly time retrieved from DSAG server
33
Fri Apr 14 06:59:13 GMT 1995
Fri Apr 14 08:59:14 MET DST 1995
set quantum = 10 ms
setquantum(DEFAULT_QUANTUM, 10 ms, 17)
created and initalized daq status segment
creating message queue file
Creating new message file /dev/msg
Creating new command file /dev/com
installing CAMAC trigger module driver and device
! /bin/dynaminst -v insttab
Char driver: (ID = 18) [trig_cam_driv.o]
Char device: (major = 21, driver = 18) [trigcam]
Node: (major = 21, minor = 0) [/dev/trigcam]
! /bin/chmod 666 /dev/trigcam
enable CAMAC/VSB interrupt (only for CVC)
phys. address CVC irq_mask: 0xC040003
irq_mask before CAMAC LAM IRQ enable: 0x36
irq_mask after CAMAC LAM IRQ enable: 0x3e
end of group specific boot procedure
start internet daemon
remove directories and files not needed anymore
boot procedure finished
user name:
CVC12 aladin (2) sbs
sbs> -CVC12 :msg_log :14-Apr-95 09:00:00 Message logger running
sbs> @slave1start
-CVC12 :util :task m_util started
-CVC12 :util :setup file setup.usf successfully loaded
-CVC12 :util :cleared daqstatus counter
sbs> -CVC12 :util :irq_mask before disabling CAMAC LAM IRQ: 0x3e
-CVC12 :util :irq_mask after disabling CAMAC LAM IRQ: 0x36
-CVC12 :util :trigger module set up as MASTER, crate nr: 1
-CVC12 :read_cam_:task m_read_cam_slav started
CVC23 aladin (2) sbs
sbs> -CVC23 :msg_log :14-Apr-95 09:00:29 Message logger running
sbs> @slave2start
-CVC23 :util :task m_util started
-CVC23 :util :setup file setup.usf successfully loaded
sbs> -CVC23 :util :cleared daqstatus counter
-CVC23 :util :irq_mask before disabling CAMAC LAM IRQ: 0x3e
-CVC23 :util :irq_mask after disabling CAMAC LAM IRQ: 0x36
-CVC23 :util :trigger module set up as SLAVE, crate nr: 2
-CVC23 :read_cam_:task m_read_cam_slav started
In the E7 (Event builder) window expect:
E7ELXA aladin (119) aeb_start
first clear the setup segment on all AEB's
Setup-segment module removed successfully !
Setup-segment module removed successfully !
Setup-segment module removed successfully !
Setup-segment module removed successfully !
starting the slave readout process on all AEB's
dumping setup into EBI for crate nr.: 3
ADR 0xd0ac VAL VSB_CAMAC_segment
ADR 0xd0e0 VAL local_CAMAC_segment
dump_setup: setup file setup.usf successfully parsed
dump_setup: setup segment setup.usf successfully dumped to ebi
dumping setup into EBI for crate nr.: 4
ADR 0xd0ac VAL VSB_CAMAC_segment
ADR 0xd0e0 VAL local_CAMAC_segment
dump_setup: setup file setup.usf successfully parsed
dump_setup: setup segment setup.usf successfully dumped to ebi
dumping setup into EBI for crate nr.: 5
ADR 0xd0ac VAL VSB_CAMAC_segment
ADR 0xd0e0 VAL local_CAMAC_segment
dump_setup: setup file setup.usf successfully parsed
dump_setup: setup segment setup.usf successfully dumped to ebi
dumping setup into EBI for crate nr.: 6
ADR 0xd0ac VAL VSB_CAMAC_segment
ADR 0xd0e0 VAL local_CAMAC_segment
dump_setup: setup file setup.usf successfully parsed
dump_setup: setup segment setup.usf successfully dumped to ebi
starting ebna49
+23
starting eb4pib
+23
starting ebkp3a
+23
starting ebkosb
+23
DONE
In the AEB windows expect (only Crate 3 shown):
HOME=/u/aladin Sunday 7:54:58 am
SHELL=zsh
PATH=/sys/CMDS:/sys/ETC/CMDS:/sys/ISP1.3/CMDS
USER=aladin
LOGPATH=/u/aladin/test
ERRPATH=/u/aladin/test
CNFPATH=/u/aladin/test
TDAScnfpath=/u/aladin/test
PEDESTAL_PATH=/u/aladin/test
FBRD_cnffile=fbdef.3
FBRD_datfile=pedestal.hodo
pc_datamod: 0x2e41e0
offset 0x34
charly pl_setup: 0x1000000
pc_mod: 0x2f38d0
*pc_mod: 0x4a
l_offset: 0x34
m_read_aeb_slave: trigger module set up as SLAVE, crate nr: 3
E7ELXA aladin (120) sbs
sbs>-E7ELXA:msg_log :14-Apr-95 09:02:08 Message logger running
sbs> @masterstart
-E7ELXA:util :task m_util started
-E7ELXA:util :setup file setup.usf successfully loaded
-E7ELXA:util :cleared daqstatus counter
-E7ELXA:transport:task m_transport started
-E7ELXA:collector:task m_collector started
sbs> -E7ELXA:event_ser:task m_event_serv started. Enable by START EVENT_SERV.
-E7ELXA:event_ser:Using fixed port 6003
-E7ELXA:collector:old flushtime: 10
-E7ELXA:collector:new flushtime: 1
-E7ELXA:event_ser:Setup: Buf_str:1/1 M_evt_pstr:ALL/str M_cl:10 Reg_ser:OFF
-E7ELXA:event_ser:Server created: HOST:E7ELXA PORT:6003
-E7ELXA:esone_ser:task m_esone_serv started
Last updated: April 14th, 1995
Volker Serfling ,
Walter F.J. Müller